Industries>Explosive atmospheres>Groups & zones

Groups & zones

Groups

Zone Category Presence of explosibles atmospheres

Group II equipment
zone 0 category 1 G Continuous, frequent
or for long periods
zone 20 category 1 D
zone 1 category 2 G Intermittent
in normal operation (likely)
zone 21 category 2 D
zone 2 category 3 G Occasional or for short periods
(never in normal operation)
zone 22 category 3 D

Group I equipment
category M 1 Presence (methane, dust)
category M 2 Risk of presence (methane, dust)

back to top of page

Zones

Hazardous areas for Group II are further divided in zones, these zones relate to the predicted occurrence of when an explosive atmosphere may be present in the area. These zones are defined as being:

Gas

Color Zones Presence of gas
0

Continuously present (during long periods)
1

Not likely to be present (regular service)
2

Accidentally present (short-time-only - never in regular service)

Nota: Drawing and colors are just an example and should not be used for an actual plant, the design of which is the chief architect's responsability.

Dusts

Color Zones Presence of dusts
20

Continuously present (during long periods)
21

Not likely to be present (regular service)
22

Accidentally present (short-time-service - never in regular service)

Nota: Drawing and colors are just an example and should not be used for an actual plant, the design of which is the chief architect's responsability.

retour haut de page

Types of protection for electrical apparatus for use in gas atmospheres

Protection
symbole		 Zones Description Drawing
0 1 2
"d" Checked Checked Flameproof enclosure
Type of protection in which the parts which can ignite an explosive atmosphere are placed in an enclosure which can withstand the pressure developed during an internal explosion of an explosive mixture and which prevents the transmission of the explosion to the explosive atmospheres surrounding the enclosure.		 flameproof enclosure
"e" Checked Checked Increased safety
Type of protection in which measures are applied so as to prevent, with a higher degree of safety, the possibility of excessive temperatures and of the occurrence of arcs or sparks in the interior and on the external parts of electrical apparatus, which does not produce them in normal service.		 increased safety
"i" "ia" Checked Checked Checked Intrinsically safety
Type of protection when no spark or any thermal effect in the circuit, produced in the test conditions prescribed in the standard (which include normal operation and specific fault conditions), is capable of causing ignition.		 intrinsically safety
"ib" Checked Checked
"m" Checked Checked Encapsulation
Type of protection in which the parts which can ignite an explosive atmosphere are enclosed in a resin sufficiently resistant to the environmental influences in such a way that this explosive atmosphere cannot be ignited by either sparking or heating which may occur within the encapsulation.		 encapsulation
"n" Checked Non incendiaire
Type of protection in which the parts which can ignite an explosive atmosphere are enclosed in a resin sufficiently resistant to the environmental influences in such a way that this explosive atmosphere cannot be ignited by either sparking or heating which may occur within the encapsulation.
"o" Checked Checked Immersion
Type of protection in which the electrical apparatus is immersed in oil.		 immersion protection
"p" Checked Checked Pressurised enclosure
Type of protection in which the protective inert gas inside the enclosure is maintained at a higher pressure than that of the surrounding atmosphere.		 Pressurised enclosure
"q" Checked Checked Powdery filling
Type of protection in which the enclosure is filled with a material in a finely granulated state.		 filled enclosure

Types of protection for electrical apparatus for use in the presence of combustible dust

Protection
symbole		 Zones Description Drawing
0 1 2
"tD" Checked Checked

Flameproof enclosure
Electrical apparatus protected by enclosure and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard.
The ignition protection is based on the limitation of the maximum surface temperature of the enclosure and other surfaces which may come into contact with dust and on the restriction of dust ingress into the enclosure by the use of ?dust-tight? or ?dust-protected? enclosures.
This standard is not applicable to electrical apparatus intended for use in underground parts of mines as well as those parts of surface installations of such mines endangered by firedamp and/or combustible dust; nor does it take account of any risk due to an emission of flammable or toxic gas from the dust.

 flameproof enclosure
"mD" "maD" Checked Checked Checked Encapsulation Intrinsically safe
Electrical apparatus protected by encapsulation type of protection ?mD? and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard.
Type of protection in which the parts which can ignite an explosive atmosphere are enclosed in a resin sufficiently resistant to environmental influences in such a way that a dust cloud or layer cannot be ignited during installation or operation.		 encapsulation
"mbD" Checked Checked
"iD" Checked Checked Checked Intrinsically safety
Intrinsically safe apparatus intended for use in potentially explosive dust cloud or dust layer environments and for associated apparatus that is intended for connection to intrinsically safe circuits which enter such environments.
Applicable to electrical apparatus in which the electrical circuits themselves are incapable of causing an explosion in the surrounding combustible dust environment.		 intrinsically safety

Types of protection for non-electrical apparatus

Protection
symbole		 Zones Description Drawing
0 1 2
"c" Checked Checked Checked

Construction safety
This standard establishes manufacturing requirements which have been proven safe, in order to avoid any inflammation sources such as friction or heating sparks. It applies to apparatus where movement and friction can occur (clutches, brakes, bearings, springs...).

 flameproof enclosure

retour haut de page

Temperature classes

Group I
Temperatures < 150°C or < 450°C
according to coal dust accumulation on equipment
Group II
Temperature class for gas (G) Permissible surface temperature of electrical equipment
T1
T2
T3
T4
T5
T6		 450°C
300°C
200°C
135°C
100°C
85°C

Ignition temperature for dusts

The dust ignition temperature depends on its consistency and nature.
The ignition temperatures for various types of dust are available from reference tables: See examples

Dusts Ignition temperature
Clouds 5 mm layer
Aluminium 560°C =450°C
Charcoal 520°C 320°C
Coal dust (lignite) 380°C 225°C
Cocoa 590°C 250°C
Coffee (ground) 580°C 290°C
Corn 530°C 460°C
Methyl cellulose 420°C 320°C
Paper fiber 570°C 335°C
Phenolic resin 530°C >450°C
Polyethylene 440°C melts
PVC 700°C >450°C
Sugar 490°C 460°C
Soot 810°C 570°C
Toner 520°C melts
Wheat 510°C 300°C

Nota: temperature information is given as an example and cannot be used as a reference table.

All the information about groups, protection type and temperature classes have to be included on the equipment marking

[General information] - [Groups and zones] - [ASCO Numatics & ATEX]
[Products & certificates] - ["ia" compatibility chart] - [Online catalogue] - [FAQ]

© Copyright ASCO Numatics 2003 - 2009